Categories
home

Top 7 Magnetic Charging Cables

All of our electronic devices, including smartphones, tablets, fitness trackers and more, offer us many individual chargers. A single cable gives you the freedom to have individual chargers for each device. If you use separate chargers that come with each device, you’ll quickly use a lot of plugs to charge your phone, tablet, and any other device. One option is that you can get a power strip and connect all the individual chargers to that power strip. However, that is an inefficient solution, as each charger works with an individual AC to DC transformer.

The cables have a thick rubber sleeve that encloses their intestines, but both, but especially the 3-foot version, are still flexible and compact enough to easily slip into a pocket or purse. Plus, each comes with a handy Velcro cable flange to keep your cable coiled and prevent tangles. Few devices support Thunderbolt 3, but if you need maximum data rates and 100W charging, this cable is the best we’ve found. EV charging cables are connected to the socket of the charging point on one side and to the vehicle socket on the other. The larger cable section means more capacity to carry power or data. Choosing a 32A fuse is wise, as it means there is no limit to supplying charging cables and it can be used with lower fuses, such as a 25A.

This means that the total output supplied to your device’s battery is relatively faster than the standard output. Your smartphone negotiates and limits the power you get from the charger based on supported charging protocols. Regardless of which method you use, remember: charging consumes the most energy when the battery is closest to emptying, usually below 40%. You’ll see much lower power values when charging your phone with a battery capacity of over 75%.

Red and black cables are responsible for charging, and these range from 5V to around 20V, the latter being a fast-charging USB cable capability. However, it costs more than the Anker version, has worse cases and comes with a two-year warranty, while the Anker has a lifetime warranty. The Anker PowerLine USB-C to USB 3.0 cable has a good length and looks great; It also achieved full USB 3.1 Gen 2 data transfer iPhone adapter speeds in our tests. But in addition to the fact that this model was not USB-IF certified, it fell short in our tests, as the advanced full-phase cable tester reported DC endurance and signal integrity errors. This cable is only sold in a package with a 60W wall charger, but the kit is a great deal if you need both. It charges phones, tablets and laptops up to 60W at top speeds and is over 6.6 feet long.

Fast charging cables can provide more power to fill battery capacity faster than conventional cables. So when you buy a fast charging cable, always select the one that supports at least 2A power supply or a specific amount of power your phone needs. The speed of charging cables usually depends on several factors. For example, fast charging cables send more power to the battery than regular cables. Regular USB cables send about 2.5V of current, while fast charging cables provide a voltage of 5V, 9V and 12V.

This means figuring out what your maximum amperage level is and getting a charger that reaches the highest level for the fastest charging. This six foot Anchor Lightning two-cable pack is braided for durability. Anyone who buys a lot of devices will accumulate a collection of micro-USB cables over time, as they are packaged with almost every device.

It’s time to upgrade those standard plugs to wall-mounted USB charging bays. Believe it or not, the thickness of a cable is also important. A thicker cable charges better than a thin cable, especially when the cable is longer than 6 feet. Samsung Galaxy is one of the most popular electronics brands in the world.

If you need a little more hardcore, nomad’s Kevlar cables are great with their super-strong body and metal cable ends. Both cables are available in USB-C and Lightning versions, and best of all, they have cable ties in the box. Tie your cables at your own discretion, firmly or in larger rings. Don’t keep them in a drawer, as it’s easy to fill things there.

This is because a thicker wire reduces electrical resistance and allows for better electron flow. Phones come with batteries designed for fast charging, so fast charging is certainly not dangerous. However, it is possible that batteries degrade a little faster with long-term fast charging. Here’s what you need to know about choosing the right charger for your device.

It will become the norm in the coming years, just as USB 3 took a while to catch on. A CEW states that the manufacturer will pay for repairs to connected equipment if it suffers temporary voltage damage when properly connected to the charger. Nylon is a special textile material that is added to USB cables to ensure that the copper core in the mobile phone cable is not damaged by external stress. It is very strong, sturdy and, in the right applications, very attractive.

Categories
home

Xbox360 Rechargable Battery Pack Not Charging The Fix Is Here!

So your rechargeable battery pack for your wireless Xbox360 controller isn�t charging, no matter what you do ayyy? And do you object to paying for another one? �Fear no more, I have two quick solutions to fix this. They both work for people (it all depends on the battery�s �unseen condition�. I have a black pack here that I just tried both of these methods which the second method worked on.

Firstly why does this happen

Ni-MH battery�s lose 30% charge in this first day with no use, then the charge rate decreases and will completely discharge at room temperature in about 30 days. The problem that you have run into is that the battery is so low that it won�t accept a charge. The capacitance of the battery its self is changing polarity to a near neutral when it reaches such a dead point. By forcing the recharge on the battery over and over again you are giving the battery enough of a charge to allow it to recharge as per normal again.

First Method

I must say thanks to the guys at Gamespot and especially�LightSpecter101�in�his post there.

Basically using your play and charge kit, a controller and said �dead� battery pack, you turn�on your 360, plug in your play and charge kit and put the battery in a controller. Plug the play and charge kit into the controller and you should see the light turn red. This means it is charging. But�quickly it goes green. Green means it is not charging. As soon as it turns green unplug it from the play and charge kit and re-plug it in again.

You must repeat this process until the red light remains on.

The Second Method

Thankfully I came across this method as I have a black controller with a black Microsoft Official battery pack and it simply was not charging!�I tried different controllers, different play and charge kits and it just did nothing! Thankfully YouTube did have an answer for me and probably many other users. Thanks to�fraviaseeker�from YouTube, his �paperclip fix� worked well! Check the video out bellow.

Basically there are six terminals and you take a paperclip/length of wire and short the 2nd and 5th terminal (left to right). �Because you are shorting it the paperclip/wire will get hot.
Keep doing this until the clip/wire stops getting hot.

Then, put the clip on the 1st and 5th terminal and then 2nd and 6th terminal to reset the logic board of the battery.

All of this is outlined in the video above.

What I did after was put the battery to charge and it has been charging for over 5 minute�s straight now (red light woohoo).

Note: For the new�xbox one controller iphone.

Feel free to leave a comment if you wish.

Good luck and hope either of these tricks work for you.

Categories
home

Xbox360 Rechargable Battery Pack Not Charging The Fix Is Here!

Published on November 6th, 2012 | by KamikazeXeX

Xbox360: Rechargable Battery Pack Not Charging? The Fix Is Here!

So your rechargeable battery pack for your wireless Xbox360 controller isn’t charging, no matter what you do ayyy? And do you object to paying for another one?  Fear no more, I have two quick solutions to fix this. They both work for people (it all depends on the battery’s “unseen condition”. I have a black pack here that I just tried both of these methods which the second method worked on.

Firstly why does this happen

Ni-MH battery’s lose 30% charge in this first day with no use, then the charge rate decreases and will completely discharge at room temperature in about 30 days. The problem that you have run into is that the battery is so low that it won’t accept a charge. The capacitance of the battery its self is changing polarity to a near neutral when it reaches such a dead point. By forcing the recharge on the battery over and over again you are giving the battery enough of a charge to allow it to recharge as per normal again.

First Method

I must say thanks to the guys at Gamespot and especially LightSpecter101 in his post there.

Basically using your play and charge kit, a controller and said “dead” battery pack, you turn on your 360, plug in your play and charge kit and put the battery in a controller. Plug the play and charge kit into the controller and you should see the light turn red. This means it is charging. But quickly it goes green. Green means it is not charging. As soon as it turns green unplug it from the play and charge kit and re-plug it in again.

You must repeat this process until the red light remains on.

The Second Method

Thankfully I came across this method as I have a black controller with a black Microsoft Official battery pack and it simply was not charging! I tried different controllers, different play and charge kits and it just did nothing! Thankfully YouTube did have an answer for me and probably many other users. Thanks to fraviaseeker from YouTube, his “paperclip fix” worked well! Check the video out bellow.

Basically there are six terminals and you take a paperclip/length of wire and short the 2nd and 5th terminal (left to right).  Because you are shorting it the paperclip/wire will get hot.
Keep doing this until the clip/wire stops getting hot.

Then, put the clip on the 1st and 5th terminal and then 2nd and 6th terminal to reset the logic board of the battery.

All of this is outlined in the video above.

What I did after was put the battery to charge and it has been charging for over 5 minute’s straight now (red light woohoo).

Note: For the new xbox one controller iphone.

Feel free to leave a comment if you wish.

Good luck and hope either of these tricks work for you.

God Bless

Regards

XeX_DuBwoofer_x

Tags: battery, charging, pack, xbox, xbox360

KamikazeXeX

Your email address will not be published. Required fields are marked *

You can get the latest posts from Techno FAQ delivered to you via Email or RSS.

We are a community of technology enthusiasts who believe that technology should be available to all and an effort should be made to help everyone understand it.

Read more >>

Are you ready for the future of the Internet?

Romsplanet – Best SNES Roms FREE Download


Powerful dedicated servers with quality support. What more could you ask for?

© CC-BY-NC-SA 2012-2019 Techno FAQ. Some rights reserved.